The process of preparing the proportion of wood glue powder
Release Time：May，17，2018
What issues do we need to pay attention to during the modulation process? Let's take a look at it together!
When the wood glue powder is adjusted, it is necessary to first weigh a certain amount of wood glue powder according to the proportion on the instruction manual, and stir it while adding water while stirring, so as to accelerate the dissolution of the rubber powder, and it is not easy to appear. phenomenon. The ratio of water to water is generally powder: water = 5:3, but according to the needs of different users, the corresponding adjustment can be made, so that the viscosity suitable for their own use can be obtained. If you want to use rubber powder for finger-joining or sputum inoculation, it is recommended that you reduce your water exchange volume. Large-area construction can increase the water exchange rate accordingly.
It should be noted that the pot life of the glue is inversely proportional to the temperature after preparation. The higher the temperature, the shorter the service life, which means that the glue is adjusted to a short gel time. Generally, the pot life is 6-3 hours at 10-20 ° C, 3 to 2 hours at 20-30 ° C, and 2 to 1 hour at 30-40 ° C. You can adjust the amount of glue according to your own situation. If there is a lot of glue, it is recommended to use electric mixer, which saves time and effort.