General considerations for balers
Release Time：May，17，2018
Mentioned the precautions of the baler. People often think of timely maintenance and maintenance, pay attention to electricity safety during use, etc. Of course, these are also matters that should be paid attention to during the use of the baler, and must be strictly enforced, but In addition to these, there are some necessary precautions that are often overlooked.
1, storage. After the user purchases the baler, it is not uninterrupted production every day. There will always be holidays or production off-season. At this time, the baler may not work for a long time, so it involves the storage problem of the baler. Choose a cool and dry place to wrap it and store the strapping cutter. To prevent the blade from being cut, you can use a nylon brush to apply a thin layer of oil to the blade and its vicinity. It is best to use the box provided by the cutter supplier when storing, to ensure that the blade does not touch any part or item in the box. The die cutter can be wrapped with foam plastic. The support block in the box must be supported by the cutter. On the short axis of both ends, it cannot be supported on the blade.
2. Transportation. This problem is not a problem for all users. Only a few users have a lot of production workshops, but the amount is not large. There is no need to purchase a lot of equipment. At this time, the user will purchase one equipment for use in each factory. When the equipment needs to be packaged and transported, it is necessary to use suitable and sturdy boxes. Each box only has one strapping cutter. The surface of the cutter is covered with foam plastic. The short shafts at both ends should be respectively covered with wooden blocks with holes. The wooden block is fixed in the box to prevent the cutter from shifting inside the box during transportation. The outside of the box needs to be entangled, and the surface of the box must be marked with the words "wearable parts" to attract attention.
3. Maintenance problems during use. This problem is of course a cliché. Many users have a certain understanding of the maintenance and maintenance of the equipment after using the equipment for a period of time. If there are any problems with the maintenance of the equipment, please call us to answer your questions.